A&D Weighing introduces the latest innovation in moisture determination.  Incorporating A&D’s extremely fast Super Hybrid Sensor technology, the MS-70 is ideal for simple measurement and low moisture content measurement applications.  The MS-70 is A&D Weighing's leading model for Moisture Analyzers because of its 0.0001g weighing resolution and 0.001% of moisture content measurement for very small moisture content applications, e.g. Plastic, Chemical, Pharmaceutical, Oil, or any moisture analysis application.

Ultra high repeatability of 0.001% is achievable with the new MS-70 Moisture Analyzer.  Determine the moisture content in difficult samples like Plastic Polyethylene Terephthalate Pellet(PET) (Moisture ~ 0.298%), Aluminum Oxide (Moisture ~ 0.098%) or even Calcium Carbonate (Moisture ~ 0.144% and required a heating temperature around 200°C).

A&D’s MS-70 moisture analyzer boasts a major advantage over other moisture analyzer devices, namely, the ability to conduct analysis of a sample containing very little moisture content.  This is advantageous when measuring samples with low evaporation characteristics.  Side-by-side comparisons with the Karl Fisher method reveal the MS-70 gives comparable results in much less time.  The analyzer utilizes software that takes the guesswork out of moisture testing.  A&D's exclusive algorithm allows sample types to be programmed and testing automatically stopped once a desired drying rate has been achieved.  Additionally the unit will calculate the optimum sample weight necessary for the analysis.  A 400-watt halogen lamp is aided by a uniquely designed Secondary Radiation Assist (SRA) filter, and together they provide fast uniform heating.  This one of a kind drying system, combined with an advanced heat protection mechanism for the weigh cell, provides superior accuracy and repeatability.

Four different operation modes give this moisture balance powerful flexibility: manual, standard, quick, and temperature step.  Five display modes: moisture content, solid content Atro moisture, Atro solid, and sample weight provide maximum versatility.

The analyzers’ memory function allows users to program up to 100 different sample testing parameters including temperature, time, or % delta of moisture change.  These factors can be easily entered from the balance keypad or downloaded from a computer through the standard RS-232C interface. WinCT data collection software is included with the balance to allow easy uploading of results for documentation and further analysis.

Many people call us looking for the absolute best value Precision Weighing Balances can offer in a moisture balance for simply moisture determination applications like sludge wastewater applications and the answer again and again is the A&D ML-50.  When price is the #1 factor and you want a quality moisture determination instrument to 1% moisture content determination then you should review the ML50 moisture balance.

Measurement Method	400 W straight halogen lamp heating system with SRA filter & SHS Weighing technology
Max Sample Weight Capacity	71 g
Weight Resolution	0.0001 g
Moisture Content Display	0.0001/0.01/0.1%
Moisture Content Accuracy	over 1 g: 0.05% over 5 g: 0.01%
Heating Technology	Halogen lamp (Straight type, 400 W max, 5000 hours)
Heating Time	The heating time can be set in the range of 1 to 480 minutes, and increments between 1-60 minutes in 1 minute intervals, 60 - 480 minutes in 5 minute increments.
Drying Temperature	50 - 200°C (1°C increment)
Memory of Measurement Programs	20 sets
Measurement Programs	Standard Mode/Automatic Complete Mode/Timer Mode/Manual Mode
Measurement Mode	Wet base/Dry base/Solid content/Ratio
Display Type	Large VFD
Interface	RS-232C Standard
Operating Temperature	5-40°C(41-104°F)less than 85% RH
GLP/GMP/ISO	Available
Self Check Function	Standard
Communication Software	Win CT Moisture.  Designed to display a graph of the moisture content rate change while measuring and makes it easier to set an appropriate analyzing mode setting with a connected PC.
Sample Pan Size	ø 85 mm / 3.4 inches
Power	AC 100V to 120V (3A) 50/60 Hz, Approx. 400 Watts
Physical Dimensions	215 (W) x 320 (D) x 173(H) mm 8.5" x 12.6" x 6.8"
Weight	Approx. 6 kg / 13.2 lbs
Standard Accessories	20 Sample Pans, 2 Pan Handles, Tweezers, Spoon, Test Sample (30g of Sodium Tartrate Dihydrate), CD-Rom Win-CT Moisture, Display Cover, Dust Cover, Instruction Manual, Quick Reference Card, Power cable, 2 Fuses

20 Sample Pans
2 Pan Handles
Tweezers
Spoon
Test Sample (30g of Sodium Tartrate Dihydrate)
CD-Rom Win-CT Moisture
Display Cover
Dust Cover
Instruction Manual
Quick Reference Card
Power cable
2 Fuses